IPS e.max CAD – Lithium disilicate for restorations with natural esthetics and strength

High-strength lithium disilicate glass ceramic with an end strength 360 MPa
Three degrees of translucency with up to 16 shades for highly esthetic results
Crystallization and glaze firing in one step – efficient and cost-effective at the same time
Excellent esthetics with optional individualization
Years of clinical experience and millions of restorations placed
Please note: The color of the precrystallized MO blanks is different from that of the HT and LT blanks. This is normal and has no influence on the final result

Single crowns (delivered in blue, precrystallized state)
Partial crowns, inlays, onlays, and veneers (delivered in blue, precrystallized state)
Three-unit bridges up to second premolar as terminal abutment (delivered in blue, precrystallized state)
Two-piece abutments for BEGO Semados^® implants

The color of the uncrystallized MO blanks is different from that of the HT and LT blanks. This is normal and has no influence on the final result.

Physical material data
Coefficient of expansion (100 – 400°C)	10.15 ± 0.4 10^-6 K^-1
Coefficient of thermal expansion (100 – 500°C)	10.45 ± 0.4 10^-6 K^-1
Flexural strength (biaxial)	≥ 360 MPa
Density	2.5 ± 0.1 g/cm³

* The following symbols are commercial designations/registered trademarks of companies, which are not part of the BEGO company group.

Pictures and illustrations are exemplary. Colors, symbols, design, and information on the labels and/or packaging shown may differ from reality.